Tips for Cleaning Ink Waste Pads on Epson XP Series Printers

Reset Epson XP-620

Printers are an essential part of our lives, but often we overlook the maintenance they require. As inkjet printers such as the Epson XP series continually print, the ink waste pads trap and collect the excess ink, preventing it from leaking or smudging your prints. Over time, these pads can become saturated and need to be cleaned to ensure the printer’s optimal performance. Here’s a step-by-step guide on how to clean ink waste pads on Epson XP series printers:

1. Turn off the printer and unplug it from the power source to prevent any accidents.

2. Open the printer cover and locate the ink waste pads. They are usually situated near the printhead assembly.

3. Carefully remove the waste pads from the printer. Place them on an absorbent material to avoid making a mess.

4. Fill a bowl with warm water and add a small amount of dish soap. Submerge the waste pads into the soapy water and gently agitate them to break down the ink residue.

5. Allow the pads to soak for about 15-20 minutes. This soaking time will help soften and dissolve the ink buildup.

6. After soaking, rinse the pads under warm running water to remove any remaining ink and soap residue. Gently squeeze them to remove excess water.

7. Place the cleaned pads on a soft cloth or paper towel and let them air dry completely. Avoid using heat or direct sunlight to speed up the drying process.

8. Once dry, reinstall the waste pads back into the printer and secure them properly.

Regularly cleaning the ink waste pads on your Epson XP series printer can extend its lifespan and improve print quality. Follow these simple steps, and you’ll have a well-maintained printer that continues to produce vibrant and crisp prints.

|You are percolating: Tips for Cleaning Ink Waste Pads on Epson XP Series Printers at

Download Epson XP-620 Resetter

– Epson XP-620 Resetter For Windows: Download
– Epson XP-620 Resetter For MAC: Download

How to Reset Epson XP-620

1. Read Epson XP-620 Waste Ink Pad Counter:

Reset Epson XP-620 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson XP-620 Waste Ink Pad Counter
Reset Epson XP-620 Step 3

Buy Wicreset Serial Key

Wicreset Key Epson XP-620

3. Put Serial Key:
Reset Epson XP-620 Step 4

4. Wait 30s, turn Epson XP-620 off then on
Reset Epson XP-620 Step 5

Reset Epson XP-620 Step 6

Reset Epson XP-620 Step 7

5. Check Epson XP-620 Counter
Reset Epson XP-620 Step 8

#Go through the complete text

How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube

– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52972 views with a duration of 4:03, taken from the YouTube channel:

Buy Wicreset Serial Key For Epson XP-620

Wicreset Key Epson XP-620

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236

Leave a Reply