Waste Ink Pad Counter Reset: Epson XP – Stop Waste Ink Pad Error Message for Free
If you are a user of Epson XP printers, you might have encountered the frustrating waste ink pad error message. This error occurs when the printer’s waste ink counter reaches its maximum limit. When this happens, the printer stops working, and you are unable to print any documents until the waste ink pad is replaced or reset.
However, there is good news for those facing this issue. You don’t have to spend money on replacing the waste ink pad or take your printer to a service center. You can easily reset the waste ink pad counter for free at home.
There are various methods available to reset the waste ink pad counter on Epson XP printers. One common method involves using software tools specifically designed for this purpose. These tools enable you to reset the counter with just a few clicks. You can find these software tools available for download on the internet.
Another method to reset the waste ink pad counter is through a series of button combinations on the printer itself. This method requires following a precise sequence of pressing buttons to access the maintenance menu and reset the counter. Instructions for this method are widely available online.
Resetting the waste ink pad counter will resolve the error message and allow you to resume printing. However, it is important to note that resetting the counter does not physically replace the waste ink pad. Over time, the pad may absorb excess ink, leading to potential leaks or other issues. It is advisable to clean or replace the waste ink pad periodically to maintain optimal printer performance.
In conclusion, if you are facing the waste ink pad error message on your Epson XP printer, there is no need to panic. By following simple instructions and using software tools or button combinations, you can reset the waste ink pad counter for free and resume printing. Remember to periodically clean or replace the waste ink pad for long-term printer performance.
Download Epson XP-640 Resetter
How to Reset Epson XP-640
1. Read Epson XP-640 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-640 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-640 off then on
5. Check Epson XP-640 Counter
Waste Ink Pad Counter Reset Epson XP stop Waste Ink Pad error message Free on Youtube
– Video Waste Ink Pad Counter Reset Epson XP stop Waste Ink Pad error message Free on YouTube, as of the current time, has received 10819 views with a duration of 30:07, taken from the YouTube channel: youtube.com/@emensky87.