Resetting Waste Ink Pad Counters for Epson XP-600 and Other Models in 20 Seconds Made Easy!
If you own an Epson XP-600 printer, or any other model from the Epson range, you may have encountered a message indicating that the printer’s waste ink pads are full. This means that the printer’s internal counter has reached its limit, and you are unable to print until this issue is resolved. However, you don’t need to worry because resetting the waste ink pads counter is an easy process that can be done in just 20 seconds!
Before you begin, please note that resetting the waste ink pads counter should only be done if you are comfortable with technical procedures. If not, it is best to seek professional assistance. Now, let’s dive into the simple steps:
1. Start by turning off your printer and disconnecting the power cord.
2. Press and hold the “Stop” and “Power” buttons simultaneously.
3. While holding down the buttons, connect the power cord back into the printer.
4. Continue holding the buttons until the printer’s light indicators start flashing.
5. Release the buttons and wait for the printer to go into “Maintenance Mode.”
6. Finally, press the “Maintenance” button to reset the waste ink pads counter. The printer will restart automatically.
That’s it! You have successfully reset the waste ink pads counter on your Epson printer. You can now resume printing without any issues.
Remember, this process is applicable to other Epson printer models as well. However, it is important to note that resetting the waste ink pads counter only addresses the immediate issue. It is crucial to eventually replace or clean the waste ink pads to avoid any potential damage to your printer in the long run.
If you are not comfortable performing this procedure on your own, it is recommended to contact an authorized service center or Epson support for assistance.
Download Epson XP-601 Resetter
– Epson XP-601 Resetter For Windows: Download
– Epson XP-601 Resetter For MAC: Download
How to Reset Epson XP-601
1. Read Epson XP-601 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-601 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-601 off then on
5. Check Epson XP-601 Counter
How to Reset Epson XP-600 and other models waste ink pads counters in 20 seconds FOR DUMMIES! on Youtube
– Video How to Reset Epson XP-600 and other models waste ink pads counters in 20 seconds FOR DUMMIES! on YouTube, as of the current time, has received 284643 views with a duration of 0:28, taken from the YouTube channel: youtube.com/@SuperPrint2010.
Buy Wicreset Serial Key For Epson XP-601
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien