Resetting the waste ink pad on your Epson Printer
If you own an Epson printer, you may encounter an error message indicating that the “waste ink pad” is full. This message is related to the printer’s waste ink tray, which collects excess ink during the printing process. Over time, this tray becomes saturated, and the printer needs to be reset to continue functioning properly. Here are the steps to reset your Epson printer’s waste ink pad:
1. Before starting the reset process, ensure that your printer is turned off and disconnected from any power source.
2. Locate the waste ink pad within your printer. This pad is usually located at the bottom of the printer, but it may vary depending on the model.
3. Use gloves or tissue to remove the waste ink pad carefully. Make sure to dispose of it properly to prevent any ink spills or contamination.
4. Clean the waste ink tray thoroughly using warm water, mild soap, and a soft cloth. Ensure that it is completely dry before reassembling.
5. Replace the waste ink pad with a new one. You can find replacement pads online or contact the printer manufacturer for assistance.
6. Once the new pad is in place, reassemble your printer, ensuring all components are securely attached.
7. Plug the printer back into the power source and turn it on. The printer should be reset and ready to use without any more error messages regarding the waste ink pad.
It is essential to note that the resetting process mentioned above may vary depending on the Epson printer model you own. It is recommended to refer to your printer’s user manual for specific instructions or contact Epson customer support for further assistance.
Download Epson PX-502A Resetter
– Epson PX-502A Resetter For Windows: Download
– Epson PX-502A Resetter For MAC: Download
How to Reset Epson PX-502A
1. Read Epson PX-502A Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson PX-502A Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson PX-502A off then on
5. Check Epson PX-502A Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson PX-502A
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien