Resetting the waste ink pad on an Epson Printer: A Step-by-Step Guide
If you own an Epson printer, you may have encountered an error message stating “waste ink pad is full” or “service required.” This occurs when the printer’s internal waste ink pads, which collect and store excess ink during cleaning cycles, reach their capacity. However, there is a way to reset the waste ink pad and get your printer back to functioning properly without the need for professional assistance.
To reset the waste ink pad on your Epson printer, follow these step-by-step instructions:
1. Firstly, make sure your printer is turned off and disconnected from the power source.
2. Locate the waste ink pad, which is typically found at the bottom of the printer. You may need to open a panel or remove certain parts of the printer to access it.
3. Take absorbent paper towels or a cloth and place them underneath the waste ink pad to catch any residual ink.
4. With gloves on, carefully remove the waste ink pad from the printer and place it on the paper towels or cloth.
5. Rinse the waste ink pad thoroughly under running water until the water runs clear. This will help remove excess ink and restore its absorbency.
6. Once the waste ink pad is clean and dry, carefully place it back into the printer in its original position.
7. Reassemble any parts or panels you may have removed during the process.
8. Finally, plug the printer back into the power source and turn it on.
By following these instructions, you should be able to reset the waste ink pad on your Epson printer and continue using it without any issues. It is important to note that regularly cleaning the waste ink pad or replacing it when necessary will help maintain the longevity and performance of your Epson printer.
Download Epson RX615 Resetter
– Epson RX615 Resetter For Windows: Download
– Epson RX615 Resetter For MAC: Download
How to Reset Epson RX615
1. Read Epson RX615 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson RX615 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson RX615 off then on
5. Check Epson RX615 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson RX615
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien