Resetting the Waste Ink Pad Counter for Epson XP 345
Are you facing the dreaded “Waste Ink Pad Counter Full” message on your Epson XP 345 printer? Don’t worry, we’ve got a solution for you – resetting the waste ink pad counter.
The waste ink pad is a small pad located inside your printer that collects excess ink during the printing process. Over time, this pad can become saturated, resulting in an error message and preventing you from printing any further. That’s where resetting the waste ink pad counter comes in.
To reset the waste ink pad counter on your Epson XP 345 printer, you’ll need to follow these steps:
Step 1: Download the Epson XP 345 waste ink pad reset utility software from a reliable source online.
Step 2: Install the software on your computer and connect your printer to it using a USB cable.
Step 3: Open the waste ink pad reset utility software and select your printer model.
Step 4: Click on the “Reset” button to initiate the waste ink pad counter reset process.
Step 5: Once the reset is complete, disconnect your printer from the computer and turn it off.
Step 6: Wait for a few minutes and then turn your printer back on. The waste ink pad counter should now be reset.
Remember, resetting the waste ink pad counter is not a permanent solution. Eventually, you’ll need to replace or clean the waste ink pad to prevent further issues. However, resetting the counter allows you to continue using your printer temporarily and buy you some time before seeking professional assistance or ordering a replacement part.
In conclusion, if you’re encountering a “Waste Ink Pad Counter Full” error message on your Epson XP 345 printer, resetting the waste ink pad counter can be a temporary fix. Just make sure to replace or clean the waste ink pad in the near future to ensure smooth printing operations.
Download Epson XP-345 Resetter
– Epson XP-345 Resetter For Windows: Download
– Epson XP-345 Resetter For MAC: Download
How to Reset Epson XP-345
1. Read Epson XP-345 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-345 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-345 off then on
5. Check Epson XP-345 Counter
Reset Epson XP 345 Waste Ink Pad Counter on Youtube
– Video Reset Epson XP 345 Waste Ink Pad Counter on YouTube, as of the current time, has received 6413 views with a duration of 4:42, taken from the YouTube channel: youtube.com/@resetprinter7584.
Buy Wicreset Serial Key For Epson XP-345
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien