Resetting Epson Printer Waste Ink Pad: A Step-by-Step Guide
If you own an Epson printer, you may have come across an issue related to the “waste ink pad.” The waste ink pad is a sponge-like component inside the printer that collects excess ink during print head cleaning cycles. Over time, this pad may become saturated, causing an error message to appear on your printer’s display, indicating that it needs to be reset. Here is a step-by-step guide on how to reset your Epson printer’s waste ink pad:
1. Start by turning off your printer and unplugging it from the power source.
2. Locate the waste ink pad, which is usually found at the bottom of the printer. You may need to remove the printer’s cover or access panel to reach it.
3. Carefully remove the waste ink pad from its position. Be cautious not to damage any other components while doing so.
4. Rinse the waste ink pad under running water until it is clean. Make sure to remove all excess ink from the pad.
5. Allow the waste ink pad to dry completely before placing it back into the printer.
6. Once the pad is dry, reinsert it into its original position within the printer.
7. Plug the printer back into the power source and turn it on.
8. Navigate to your printer’s settings menu and look for an option to reset the waste ink pad counter.
9. Follow the on-screen instructions to complete the reset process.
By following these steps, you should be able to reset the waste ink pad on your Epson printer. This will help you alleviate the error message and ensure that your printer continues to function optimally. However, keep in mind that resetting the waste ink pad is a temporary solution, and it may be wise to consider replacing it if the issue reoccurs frequently.
Download Epson R2400 Resetter
– Epson R2400 Resetter For Windows: Download
– Epson R2400 Resetter For MAC: Download
How to Reset Epson R2400
1. Read Epson R2400 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson R2400 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson R2400 off then on
5. Check Epson R2400 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson R2400
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien