Guide to Resetting the Waste Ink Pad of an Epson Printer
If you own an Epson printer and have encountered the dreaded “waste ink pad” error message, don’t panic. This issue is quite common, and fortunately, there is a way to reset your printer and get it back up and running.
The waste ink pad is a part of the printer’s maintenance system, responsible for capturing and storing any excess ink during the printing process. Over time, this pad can become saturated, leading to an error message indicating it needs to be replaced or cleaned. However, instead of going through the hassle and expense of replacing the pad, you can reset it yourself.
To reset the waste ink pad on your Epson printer, start by turning off the printer and unplugging it from the power source. Then, press and hold the power button for about 10 seconds to discharge any remaining power.
Next, locate the reset button on your printer. This button is typically recessed and may require a pen or paperclip to press it. Press and hold the reset button while turning the printer back on.
Continue holding the reset button for about 10 seconds until the printer’s indicator lights start flashing. This indicates that the waste ink pad has been successfully reset.
Once the reset process is complete, make sure to turn off the printer and unplug it from the power source again. Wait for a few minutes before plugging it back in and turning it on. Your printer should now be free from the waste ink pad error message.
By following these simple steps, you can reset the waste ink pad on your Epson printer and save yourself the trouble and cost of replacing it. Keep in mind that resetting the waste ink pad is a temporary solution, and eventually, it may become necessary to replace or clean the pad.
Download Epson PX-V780 Resetter
– Epson PX-V780 Resetter For Windows: Download
– Epson PX-V780 Resetter For MAC: Download
How to Reset Epson PX-V780
1. Read Epson PX-V780 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson PX-V780 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson PX-V780 off then on
5. Check Epson PX-V780 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson PX-V780
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien