Guide: Resetting Epson Printer’s Waste Ink Pad
Resetting the waste ink pad on your Epson printer can help prolong its lifespan and improve its overall performance. The waste ink pad is an important component that collects excess ink during the printing process. However, over time, this pad becomes saturated and needs to be reset to ensure smooth printing operations. Here are some steps to help you reset the waste ink pad on your Epson printer:
1. Turn off your printer and unplug it from the power source. This will prevent any accidents and ensure your safety during the process.
2. Locate the waste ink pad, which is usually located at the bottom of the printer. You may need to consult your printer’s user manual or check online resources for specific instructions on where to find it.
3. Carefully remove the waste ink pad from the printer. Make sure to wear gloves to avoid any ink stains on your hands.
4. Clean the waste ink pad by rinsing it under running water until the excess ink is removed. Alternatively, you can replace the pad with a new one if necessary.
5. Once the waste ink pad is clean or replaced, reinsert it back into the printer.
6. Plug the printer back into the power source and turn it on.
7. You may need to reset the printer’s waste ink counter through the printer’s menu or through a software tool provided by Epson. This step varies depending on the model of your printer and can be found in the user manual or online resources.
By following these steps, you can effectively reset the waste ink pad on your Epson printer and ensure its longevity and consistent performance. Remember to consult your printer’s user manual or online resources for specific instructions tailored to your printer model.
Download Epson Photo 2100 Resetter
– Epson Photo 2100 Resetter For Windows: Download
– Epson Photo 2100 Resetter For MAC: Download
How to Reset Epson Photo 2100
1. Read Epson Photo 2100 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson Photo 2100 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson Photo 2100 off then on
5. Check Epson Photo 2100 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson Photo 2100
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien