Guide: Cleaning Ink Waste Pads on Epson XP Series Printers

5/5 - (37 votes)

Reset Epson XP-422

If you own an Epson XP Series printer, you may have encountered the issue of ink waste pads becoming full over time. This can result in excessive ink leakage or even damage to your printer. Cleaning the ink waste pads is an essential maintenance task that can help ensure the longevity and efficiency of your printer. Follow these steps to clean the ink waste pads on your Epson XP Series printer.

1. Turn off your printer and unplug it from the power source. This is important for your safety and to prevent any damage to the printer.

2. Open the printer cover and locate the ink waste pads. They are usually located towards the right side of the printer.

3. Carefully remove the waste pads. You may need to use a pair of tweezers or gloves to avoid any contact with the ink.

4. Rinse the waste pads under running water until the water runs clear. This will help remove any excess ink.

5. Allow the waste pads to air dry completely before placing them back into the printer. Make sure they are completely dry to avoid any moisture damage to your printer.

6. Once dry, carefully place the waste pads back into their original position in the printer.

7. Close the printer cover and plug it back into the power source.

Regularly cleaning the ink waste pads on your Epson XP Series printer will help maintain the printer’s performance and prevent any ink-related issues. Remember to follow these steps cautiously to avoid any damage or injury. By maintaining your printer properly, you can ensure its durability and enjoy high-quality printing for an extended period.

|You are flipping through: Guide: Cleaning Ink Waste Pads on Epson XP Series Printers at resetprinters.net

Download Epson XP-422 Resetter

– Epson XP-422 Resetter For Windows: Download
– Epson XP-422 Resetter For MAC: Download

How to Reset Epson XP-422

1. Read Epson XP-422 Waste Ink Pad Counter:

Reset Epson XP-422 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson XP-422 Waste Ink Pad Counter
Reset Epson XP-422 Step 3

Buy Wicreset Serial Key

Wicreset Key Epson XP-422

3. Put Serial Key:
Reset Epson XP-422 Step 4

4. Wait 30s, turn Epson XP-422 off then on
Reset Epson XP-422 Step 5

Reset Epson XP-422 Step 6

Reset Epson XP-422 Step 7

5. Check Epson XP-422 Counter
Reset Epson XP-422 Step 8

#Access supplementary details https://resetprinters.net/resetting-epson-xp-320-xp-420-xp-424-tx-730wd-artisan-837-ink-pad-counter

How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube

– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52970 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.

Buy Wicreset Serial Key For Epson XP-422

Wicreset Key Epson XP-422

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Leave a Reply