Epson XP Error: Ink Pad Replacement and Printer Reset with Code/Key.
Are you struggling with your Epson XP printer displaying the dreaded “Ink Pad Error”? Don’t worry, we’ve got you covered! This error message typically occurs when the printer’s internal ink pads are saturated with ink. Normally, these pads are responsible for collecting excess ink during the printing process. However, over time, they can become full and require replacement. Luckily, you can avoid the hassle and expense of taking your printer to a service center by resetting it yourself using a code or key.
Resetting your Epson XP printer can be done in a few simple steps. First, you’ll need to obtain an ink pad reset code, which you can find online or through Epson support. Once you have this code, turn off your printer and unplug it from the power source. Next, hold down the “Stop” and “Maintenance” buttons simultaneously, and then press the power button. Keep holding the “Stop” and “Maintenance” buttons until the printer boots up and shows the message “Initiate reset.” Now, enter the reset code you obtained earlier using the printer’s keypad. Finally, power off and on the printer to complete the reset process. Voila! Your printer should now be ready to go.
While resetting your printer is a relatively simple process, it should be noted that this solution only addresses the ink pad error temporarily. Eventually, the ink pads may become fully saturated again, and you may need to repeat the reset process or consider replacing them. However, resetting your Epson XP printer can save you time and money in the short term, providing you with a convenient workaround until further action is needed.
In conclusion, dealing with an Epson XP ink pad error doesn’t have to be a major headache. By following these steps and resetting your printer using a code or key, you can quickly resolve the issue and continue printing without any hindrance.
Download Epson XP-103 Resetter
– Epson XP-103 Resetter For Windows: Download
– Epson XP-103 Resetter For MAC: Download
How to Reset Epson XP-103
1. Read Epson XP-103 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-103 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-103 off then on
5. Check Epson XP-103 Counter
Epson XP error – ink pad replacement and reset of the printer using a code / key. on Youtube
– Video Epson XP error – ink pad replacement and reset of the printer using a code / key. on YouTube, as of the current time, has received 192708 views with a duration of 16:39, taken from the YouTube channel: youtube.com/@tristramo3760.
Buy Wicreset Serial Key For Epson XP-103
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien