Epson Cartridge: A Step-by-Step Guide on Resetting
Resetting an Epson cartridge can be a useful technique to ensure maximum ink usage and prolong the lifespan of the cartridge. Here are some steps to help you reset an Epson cartridge:
1. Remove the cartridge: Begin by turning on your Epson printer and opening the printer cover. Wait for the cartridge holding tray to move to the access position. Gently push down on the cartridge tab and lift it out of the tray.
2. Clean the printer contacts: Use a lint-free cloth or a cotton swab dipped in rubbing alcohol to clean the metal contacts on both the cartridge and the printer. This helps to ensure a proper connection and prevent any ink-related issues.
3. Reinsert the cartridge: After cleaning the contacts, carefully reinsert the cartridge back into the tray. Make sure it clicks into place securely.
4. Reset the chip: Epson cartridges are equipped with a built-in chip that monitors ink levels. To reset the chip, you may need to use an Epson chip resetter or follow specific instructions provided by Epson. This will vary depending on the cartridge model.
5. Test the cartridge: Once the chip is reset, close the printer cover and wait for the printer to recognize the cartridge. Print a test page or run a nozzle check to ensure that the cartridge is working properly.
Resetting an Epson cartridge can help overcome certain ink-related issues, such as low ink alerts or poor print quality. However, it is important to note that resetting a cartridge may not always solve the underlying problem. If you continue to experience issues even after resetting, it is recommended to consult the printer manual or seek professional assistance.
Download Epson R390 Resetter
– Epson R390 Resetter For Windows: Download
– Epson R390 Resetter For MAC: Download
How to Reset Epson R390
1. Read Epson R390 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson R390 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson R390 off then on
5. Check Epson R390 Counter
How To Reset An Epson Cartridge on Youtube
– Video How To Reset An Epson Cartridge on YouTube, as of the current time, has received 221397 views with a duration of 1:14, taken from the YouTube channel: youtube.com/@EncrosRefillCartridge.
Buy Wicreset Serial Key For Epson R390
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien