An easy guide to resetting an Epson ink cartridge, fooling it into believing it is fully refilled.
If you have an Epson ink cartridge that is low on ink or showing that it’s empty, you don’t necessarily have to rush out to buy a new one. With a little ingenuity, you can reset the cartridge and trick it into thinking it’s full, thereby extending its lifespan. Here’s a simple guide to help you reset your Epson ink cartridge:
1. First, remove the cartridge from your Epson printer and inspect it for any leakages or damages. Ensure that the ink cartridge is clean and in good condition.
2. Locate the chip on the cartridge. This is a small electronic component that communicates with the printer and indicates the ink level. Use tape to cover the chip, making sure not to cover any other contacts or sensors.
3. Reinsert the cartridge back into the printer and close the lid. Wait for a few moments to allow the printer to recognize the cartridge.
4. Open the printer lid and remove the cartridge once again. Remove the tape from the chip and clean any residue left behind.
5. Repeat steps 2–4 at least two more times, as some Epson printers require multiple resets.
6. Once you’ve completed the resetting process, reinsert the cartridge into your printer. It should now display as full or have an increased ink level.
It’s important to note that resetting an Epson ink cartridge may not work for all models. Additionally, this method may void any warranty on the cartridge. Use this method as a last resort before purchasing a new cartridge.
Remember, extending the life of an ink cartridge through resetting and tricking it into thinking it’s full is a temporary solution. It’s recommended to always keep a spare cartridge handy and regularly check for legitimate replacement when needed.
Download Epson NX420 Resetter
– Epson NX420 Resetter For Windows: Download
– Epson NX420 Resetter For MAC: Download
How to Reset Epson NX420
1. Read Epson NX420 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson NX420 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson NX420 off then on
5. Check Epson NX420 Counter
How to reset an Epson ink cartridge and trick it into thinking it’s full. on Youtube
– Video How to reset an Epson ink cartridge and trick it into thinking it’s full. on YouTube, as of the current time, has received 534107 views with a duration of 1:57, taken from the YouTube channel: youtube.com/@Theinkrefillexperts.
Buy Wicreset Serial Key For Epson NX420
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien