How to Reset the waste ink pad on an Epson Printer

Reset Epson XP-305

If you own an Epson printer, you may have encountered a common issue: the “waste ink pad” error message. This error indicates that the printer’s waste ink pad is full, and it needs to be reset. The waste ink pad is a sponge-like material located inside the printer, which absorbs excess ink during printing. Over time, this pad becomes saturated, leading to the error message.

To reset the waste ink pad, follow these steps:

1. Begin by turning off the printer and disconnecting it from the power source.

2. Locate the waste ink pad inside the printer. It is usually near the printer cartridges.

3. Use gloves and a paper towel to absorb the excess ink from the waste ink pad. Be careful not to damage the pad or any other printer components.

4. Once the excess ink has been removed, clean the pad with warm, soapy water. Rinse it thoroughly and allow it to dry completely.

5. After the pad is dry, place it back in the printer and reassemble any parts that were removed during the cleaning process.

6. Plug the printer back into the power source and turn it on.

7. To complete the reset process, navigate to the printer settings menu and select the option to reset the waste ink pad counter.

Following these steps should successfully reset the waste ink pad and eliminate the error message. However, it’s important to note that this is a temporary solution, and the waste ink pad will eventually reach its limit again. In such cases, it is recommended to contact Epson’s customer support for further assistance.

|You are exploring: How to Reset the waste ink pad on an Epson Printer at resetprinters.net

Download Epson XP-305 Resetter

– Epson XP-305 Resetter For Windows: Download
– Epson XP-305 Resetter For MAC: Download

How to Reset Epson XP-305

1. Read Epson XP-305 Waste Ink Pad Counter:

Reset Epson XP-305 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson XP-305 Waste Ink Pad Counter
Reset Epson XP-305 Step 3

Buy Wicreset Serial Key

Wicreset Key Epson XP-305

3. Put Serial Key:
Reset Epson XP-305 Step 4

4. Wait 30s, turn Epson XP-305 off then on
Reset Epson XP-305 Step 5

Reset Epson XP-305 Step 6

Reset Epson XP-305 Step 7

5. Check Epson XP-305 Counter
Reset Epson XP-305 Step 8

#Go for more https://resetprinters.net/epson-reset-adjustment-program-for-xp300-xp315-xp400-xp415-xp610-xp615-xp701-xp710-xp801-xp810-xp950

How To Reset Epson Printer “waste ink pad” on Youtube

– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114512 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.

Buy Wicreset Serial Key For Epson XP-305

Wicreset Key Epson XP-305

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Leave a Reply