Tutorial on how to reset the ink pad on an Epson L382 printer
If you are a proud owner of an Epson L382 printer, you might have encountered the frustrating “Ink Pad is at the end of its service life” error. This error occurs when the printer’s ink pad, which absorbs excess ink during printing, becomes full. Fortunately, there is a way to reset the ink pad and get your printer back up and running without the need for expensive repair or replacement.
To begin the ink pad reset process for your Epson L382 printer, ensure that the printer is turned off and unplugged from the power source. Next, press and hold the “Stop” button, the “Power” button, and the “Maintenance” button simultaneously. Continue holding these buttons until the “Maintenance” light starts to flash. This indicates that the printer has entered maintenance mode.
Once in maintenance mode, release the buttons. Now, use the “Maintenance” button to select the “Waste Ink Pad Counter” option and press the “OK” button. At this point, the printer will prompt you to confirm the ink pad counter reset. Press the “OK” button again to confirm.
After confirming the reset, the printer will power off. Wait for a few seconds, then turn on the printer. The ink pad reset process is now complete, and you can resume printing as usual.
It is important to note that regularly resetting the ink pad counter is not a permanent solution. Over time, the ink pad will reach its maximum capacity, and you may need to replace it to ensure optimal printer performance. However, by following this Epson L382 ink pad reset tutorial, you can extend the printer’s lifespan and continue printing without any disruptions.
Download Epson SX435W Resetter
– Epson SX435W Resetter For Windows: Download
– Epson SX435W Resetter For MAC: Download
How to Reset Epson SX435W
1. Read Epson SX435W Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson SX435W Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson SX435W off then on
5. Check Epson SX435W Counter
Epson L382 Ink Pad Reset Tutorial on Youtube
– Video Epson L382 Ink Pad Reset Tutorial on YouTube, as of the current time, has received 13639 views with a duration of 0:55, taken from the YouTube channel: youtube.com/@BilalKhalid.
Buy Wicreset Serial Key For Epson SX435W
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien