How to perform a reset on an Epson printer | How to perform a printer reset

4.4/5 - (17 votes)

Reset Epson CX3300

If you’re experiencing any issues with your Epson printer, resetting it can often solve the problem. Resetting helps to restore the printer settings back to default, removing any software glitches that may be causing the issue. Here’s a step-by-step guide on how to reset your Epson printer:

1. Start by checking if your printer is turned on and connected to your computer. Make sure there are no pending print jobs in the queue.

2. Locate the control panel of your Epson printer. Look for a small button labeled “Reset” or “Factory Reset”. Depending on the model, it may be inside a small hole that you can access using a paperclip or pin.

3. Press and hold the reset button for about 5-10 seconds or until you see the lights on the printer start blinking.

4. Once the lights start blinking, release the reset button. This indicates that the printer has been successfully reset.

5. Now, turn off your printer and unplug the power cable from the wall outlet. Leave it unplugged for at least 5 minutes.

6. After 5 minutes, reconnect the power cable to the wall outlet and turn on the printer. Wait for it to fully initialize.

7. Once the initialization process is complete, try printing a test page to check if the reset has resolved the issue.

Remember, resetting your Epson printer should be the last resort when troubleshooting. If the problem persists even after resetting, it’s best to contact Epson customer support for further assistance.

In summary, resetting your Epson printer can help resolve software glitches and restore its default settings. Following these steps should guide you through the process successfully.

|You are concentrating on the words: How to perform a reset on an Epson printer | How to perform a printer reset at

Download Epson CX3300 Resetter

– Epson CX3300 Resetter For Windows: Download
– Epson CX3300 Resetter For MAC: Download

How to Reset Epson CX3300

1. Read Epson CX3300 Waste Ink Pad Counter:

Reset Epson CX3300 Step 2

If Resetter shows error: I/O service could not perform operation… same as below picture:
I/O service could not perform operation

==>Fix above error with Disable Epson Status Monitor: Click Here,  restart printer/computer and then try again.
2. Reset Epson CX3300 Waste Ink Pad Counter
Reset Epson CX3300 Step 3

Buy Wicreset Serial Key

Wicreset Key Epson CX3300

3. Put Serial Key:
Reset Epson CX3300 Step 4

4. Wait 30s, turn Epson CX3300 off then on
Reset Epson CX3300 Step 5

Reset Epson CX3300 Step 6

Reset Epson CX3300 Step 7

5. Check Epson CX3300 Counter
Reset Epson CX3300 Step 8

#Look into it further

How to reset Epson printer | How to reset printer on Youtube

– Video How to reset Epson printer | How to reset printer on YouTube, as of the current time, has received 42056 views with a duration of 2:22, taken from the YouTube channel:

Buy Wicreset Serial Key For Epson CX3300

Wicreset Key Epson CX3300

Contact Support:

Mobile/ Whatsapp: +0084 915 589 236

Leave a Reply