Guide to resolving a blockage on an Epson EcoTank Printer
If you own an Epson EcoTank printer, you are probably familiar with its exceptional printing capabilities and cost-saving benefits. However, like any printer, there may be instances where you encounter a clog that hinders its function. Don’t fret! In this article, we will guide you through a few simple steps on how to fix a clog on your Epson EcoTank printer.
The first thing you should do is identify the ink tank that is causing the blockage. Carefully open the printer cover and locate the specific ink tank. Keep in mind that there are multiple ink tanks for different colors.
Once you have identified the problematic tank, remove it from the printer. Gently shake the tank to encourage the ink to flow smoothly. Avoid excessive shaking as it may cause leakage or damage.
Now, take a lint-free cloth or paper towel and dampen it slightly with distilled water. Gently wipe the printhead area of the ink tank to remove any dried ink or debris that might be causing the clog. Avoid applying excessive pressure while cleaning.
After cleaning, wait for a few minutes to allow the ink tank to dry. We recommend not leaving the ink tank exposed for too long to prevent the ink from drying out.
Once the ink tank is dry, reinsert it into the printer and securely close the printer cover.
Finally, perform a printhead cleaning operation using the printer’s control panel or software. This process will help remove any remaining clogs and improve the print quality. Refer to your printer’s user manual or Epson’s official website for instructions specific to your model.
By following these simple steps, you can fix a clog on your Epson EcoTank printer and continue enjoying its reliable and efficient printing capabilities. Remember to handle the ink tanks with care and regularly maintain your printer to prevent future clogs.
Download Epson ET-2720 Resetter
– Epson ET-2720 Resetter For Windows: Download
– Epson ET-2720 Resetter For MAC: Download
How to Reset Epson ET-2720
1. Read Epson ET-2720 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2720 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-2720 off then on
5. Check Epson ET-2720 Counter
How to Fix a Clog on an Epson EcoTank Printer on Youtube
– Video How to Fix a Clog on an Epson EcoTank Printer on YouTube, as of the current time, has received 137313 views with a duration of 19:33, taken from the YouTube channel: youtube.com/@AngieHolden.
Buy Wicreset Serial Key For Epson ET-2720
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien