Guide: How to Reset the Waste Ink Pad on an Epson Printer
If you own an Epson printer, you may have encountered a common issue where you receive an error message indicating that the printer’s “waste ink pad” is full or nearing its capacity. The waste ink pad is a small sponge-like reservoir that collects the excessive ink during printer cleaning cycles. As this pad fills up, it can cause various issues such as poor print quality and ultimately rendering the printer inoperable. Thankfully, there is a way to reset the waste ink pad and restore your printer’s functionality.
To begin with, you will need to download and install a specific software called the “Epson Adjustment Program” or “Epson Resetter.” This program allows you to reset the ink pad counter and eliminate the error message. You can easily find this software online, usually for free or a small fee.
Once you have the software installed, follow these steps to reset the waste ink pad:
1. Open the Epson Adjustment Program and select your printer model.
2. Click on the “Initialization” or “Maintenance” tab.
3. Look for the option that says “Waste ink pad counter” or something similar.
4. Click on “Check” to see the current waste ink pad status.
5. Next, click on “Initialization” or “Reset” to reset the counter.
6. After the reset process is complete, turn off your printer and then turn it back on.
It is important to note that resetting the waste ink pad is a temporary fix, and it is recommended to replace or clean the waste ink pad in the long run. If you are not comfortable doing it yourself, it is advised to seek professional assistance.
By following these steps, you can reset the waste ink pad on your Epson printer and continue printing without any errors. However, remember that regular maintenance and care of your printer will ensure its longevity and prevent the waste ink pad from reaching its capacity again.
Download Epson SX400 Resetter
– Epson SX400 Resetter For Windows: Download
– Epson SX400 Resetter For MAC: Download
How to Reset Epson SX400
1. Read Epson SX400 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson SX400 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson SX400 off then on
5. Check Epson SX400 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson SX400
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien