Epson T20 Waste Ink Pad Counter Reset
If you own an Epson T20 printer and are experiencing a “Service Required” error message, chances are it is related to the waste ink pad counter being full. Epson printers have a built-in waste ink pad, which collects any excess ink during the printing process. Once this pad is full, the printer will stop working and display an error message.
Luckily, there is a reset option available to resolve this issue. Resetting the waste ink pad counter will allow you to continue using your printer without any interruptions. However, it is important to note that resetting the counter does not physically clean or replace the waste ink pad, so it is a temporary solution.
To reset the waste ink pad counter on your Epson T20 printer, you can follow the steps below:
1. Turn off your printer and disconnect it from the power source.
2. Press and hold the “Paper” button on the printer.
3. While holding the “Paper” button, press and hold the “Power” button.
4. Continue holding both buttons until the printer’s indicators start blinking.
5. Release the buttons. The printer will now start the resetting process, which may take a few seconds.
6. Once the resetting process is complete, the printer’s indicators will stop blinking and remain steady.
7. Turn off the printer and disconnect it from the power source for a few seconds.
8. Reconnect the printer to the power source, turn it on, and the waste ink pad counter should now be reset.
It is always recommended to clean or replace the waste ink pad if it is full to avoid any further issues. Additionally, regular maintenance and proper usage of your printer can help prevent the waste ink pad from filling up quickly.
Download Epson T20 Resetter
– Epson T20 Resetter For Windows: Download
– Epson T20 Resetter For MAC: Download
How to Reset Epson T20
1. Read Epson T20 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson T20 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson T20 off then on
5. Check Epson T20 Counter
Reset Epson T20 Waste Ink Pad Counter on Youtube
– Video Reset Epson T20 Waste Ink Pad Counter on YouTube, as of the current time, has received 134 views with a duration of 1:39, taken from the YouTube channel: youtube.com/@hethongbaotri9031.
Buy Wicreset Serial Key For Epson T20
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien