Complete guide to resetting the Epson ET-2760 Adjustment Program and resetting the waste ink pad counter to 100% E-11 using an Epson ET2760 resetter.
Are you struggling with the “E-11 Waste ink pad counter” error on your Epson ET-2760 printer? Don’t worry, we’ve got a solution for you! In this article, we will guide you on how to reset the Epson ET-2760 Adjustment Program and fix the waste ink pad counter error.
Firstly, you need to download the Epson ET-2760 Adjustment Program. This software allows you to reset various maintenance tasks, including the waste ink pad counter. You can find the Adjustment Program online by searching for “Epson ET-2760 Adjustment Program download.”
Once you have downloaded the program, unzip the files and run the executable file. Follow the on-screen instructions to install the program on your computer.
After installation, connect your Epson ET-2760 printer to your computer using a USB cable. Make sure the printer is turned on and recognized by the computer.
Launch the Epson Adjustment Program and select your printer model (ET-2760) from the drop-down menu. Click on the “Particular adjustment mode” tab and then select “Waste ink pad counter.”
Click on the “Check” button to see the current waste ink pad counter status. If it shows 100% and “E-11” error, it means your ink pads are full and need to be replaced or reset.
To reset the counter, click on the “Initialization” button. A prompt will appear asking for confirmation. Click “OK,” and the program will reset the waste ink pad counter.
Once the reset process is completed, restart your Epson ET-2760 printer. The waste ink pad counter error should be resolved, and you can continue using your printer without any issue.
Remember, resetting the waste ink pad counter is a temporary solution. It is recommended to replace the ink pads periodically or take your printer to an authorized service center for proper maintenance.
In conclusion, by following the steps mentioned above, you can easily reset the Epson ET-2760 Adjustment Program and fix the waste ink pad counter error. This will allow you to continue using your printer smoothly and efficiently.
Download Epson ET-2760 Resetter
– Epson ET-2760 Resetter For Windows: Download
– Epson ET-2760 Resetter For MAC: Download
How to Reset Epson ET-2760
1. Read Epson ET-2760 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2760 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-2760 off then on
5. Check Epson ET-2760 Counter
How to reset Epson ET-2760 Adjustment Program ,resetter epson ET2760 Waste ink pad counter 100% E-11 on Youtube
– Video How to reset Epson ET-2760 Adjustment Program ,resetter epson ET2760 Waste ink pad counter 100% E-11 on YouTube, as of the current time, has received 4064 views with a duration of 2:06, taken from the YouTube channel: youtube.com/@DongBuiPhuong.
Buy Wicreset Serial Key For Epson ET-2760
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien