Guide on Resetting the Waste Ink Pad on an Epson Printer
Resetting the “waste ink pad” on an Epson printer is a necessary step when it reaches its maximum capacity. The waste ink pad is a sponge-like material located inside the printer that absorbs excess ink during printing and cleaning cycles. Over time, the pad becomes saturated, and the printer will display an error message indicating that it needs to be replaced or reset.
To reset the waste ink pad on an Epson printer, follow the steps below:
1. Turn off the printer and unplug the power cord from the wall outlet. Wait for a few minutes for the printer to cool down.
2. Locate the waste ink pad, which is typically situated at the bottom of the printer. It may require removing the printer’s cover or certain parts to access it properly.
3. Once you’ve located the waste ink pad, remove it from the printer carefully. You can wear gloves to prevent ink from getting on your hands.
4. Clean the waste ink pad by rinsing it thoroughly with warm water until the water runs clear. Allow it to dry completely before reinserting it into the printer.
5. After drying, reinstall the waste ink pad back into its original position within the printer.
6. Plug the power cord back into the wall outlet, turn on the printer, and wait for it to initialize.
By following these steps, you have successfully reset the waste ink pad on your Epson printer. This process should enable you to continue using your printer without any error messages related to the waste ink pad. It’s important to note that this method may not be applicable to all Epson printer models. For specific instructions on resetting the waste ink pad, refer to the user manual or Epson’s official website.
Download Epson PX-203 Resetter
– Epson PX-203 Resetter For Windows: Download
– Epson PX-203 Resetter For MAC: Download
How to Reset Epson PX-203
1. Read Epson PX-203 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson PX-203 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson PX-203 off then on
5. Check Epson PX-203 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson PX-203
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien