Guide on performing a factory reset for the Epson M2140 Ink tank printer | Instructions for resetting the Epson Duplex M2140 printer
If you are facing any issues with your Epson M2140 Ink Tank Printer or want to restore it to its original settings, performing a factory reset can be an effective solution. Similarly, if you own an Epson Duplex M2140 Printer and want to reset it, here’s a step-by-step guide to help you out.
Before starting the factory reset process, make sure to back up any important files or settings as they will be erased during the reset. Follow these simple steps to initiate the factory reset:
1. Turn off your printer and disconnect it from the power source.
2. Locate the reset button on the rear side of the printer. It is usually a small hole labeled “Reset.”
3. Use a paperclip or a similar pointed object and press and hold the reset button for about 10 seconds.
4. While still holding the reset button, connect the printer to the power source.
5. Continue holding the reset button until the printer’s LED indicators start flashing.
6. Release the reset button and wait for the printer to finish the reset process. This may take a few minutes.
7. Once the LED indicators stop flashing, the printer has been successfully reset to its factory settings.
8. You can now turn on the printer and start configuring it according to your preference. Remember to reinstall any necessary drivers or software.
Performing a factory reset can help resolve various software or configuration-related issues with your Epson M2140 Ink Tank Printer or Epson Duplex M2140 Printer. However, if the problems persist or worsen after the reset, it is advisable to contact Epson customer support for further assistance.
Download Epson M2120 Resetter
– Epson M2120 Resetter For Windows: Download
– Epson M2120 Resetter For MAC: Download
How to Reset Epson M2120
1. Read Epson M2120 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson M2120 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson M2120 off then on
5. Check Epson M2120 Counter
How to do factory reset of Epson M2140 Ink tank printer | How to reset epson Duplex M2140 printer on Youtube
– Video How to do factory reset of Epson M2140 Ink tank printer | How to reset epson Duplex M2140 printer on YouTube, as of the current time, has received 19200 views with a duration of 0:42, taken from the YouTube channel: youtube.com/@KumarPrinter.
Buy Wicreset Serial Key For Epson M2120
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien