A Guide on Resetting the Waste Ink Pad in Epson Printer
If you own an Epson printer, you may encounter a frequent issue known as the “waste ink pad” error. This error occurs when the printer’s waste ink pad reaches its maximum capacity, causing the printer to stop functioning. However, you can easily reset the waste ink pad and resolve the issue.
To reset the waste ink pad on your Epson printer, follow these simple steps:
1. Start by turning off your printer and unplugging it from the power source.
2. Locate and open the printer’s cover to access the cartridges and print head.
3. Look for the waste ink pads, which are usually located at the bottom of the printer. They are small, rectangular sponge-like pads. Use gloves or tissue paper to avoid contact with the ink.
4. Remove the waste ink pads from the printer and clean them thoroughly. You can rinse them with warm water or use a cleaning solution recommended by Epson.
5. After cleaning, leave the pads to dry completely. It’s important that they are completely dry before reinstalling them.
6. Once the pads are dry, place them back into their original position in the printer.
7. Close the printer’s cover, plug it back into the power source, and turn it on.
8. Now, you need to reset the waste ink counter to complete the process. You can find instructions on how to reset the counter specific to your Epson printer model online. Epson provides guidance and tools to reset the waste ink pad counter on their official website.
By following these steps, you can easily reset the waste ink pad on your Epson printer and get it back into working condition. It’s recommended to clean the waste ink pads regularly to prevent this issue in the future.
Download Epson L4156 Resetter
– Epson L4156 Resetter For Windows: Download
– Epson L4156 Resetter For MAC: Download
How to Reset Epson L4156
1. Read Epson L4156 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson L4156 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson L4156 off then on
5. Check Epson L4156 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114507 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson L4156
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien