Resetting the waste ink pad on Epson Printer: A Step-by-Step Guide
If you own an Epson printer, you may have encountered a message saying that the “waste ink pad” is full and needs to be reset. This error message indicates that the internal cushion used to collect and absorb excess ink during printing has reached its maximum capacity. However, fear not, as there is a simple method to reset the waste ink pad and continue using your printer hassle-free.
To begin the process, make sure your Epson printer is turned off and disconnected from your computer. Then, locate the two buttons on the printer: the power button and the reset button. Press and hold both buttons simultaneously.
While holding the buttons, turn on the printer. Keep holding the buttons until you notice the LED lights turn on and the printer starts making noise. This indicates that the printer is in “Service Mode.” At this point, release the buttons.
Next, download the Epson Adjustment Program specific to your printer model. This program is readily available online, and you can easily find it by searching the model number of your Epson printer followed by “Adjustment Program.”
Install and open the program, and then select your printer from the provided list. Look for an option that says “Waste ink pad counter” or something similar. Click on it and press the “Initialize” or “Reset” button.
Once the process is complete, turn off your printer and disconnect it from your computer. Wait for a few seconds, and then turn it back on. You should now be able to use your Epson printer without any issues related to the “waste ink pad.”
By following these steps, you can quickly and easily reset the waste ink pad in your Epson printer. This will save you the hassle of having to send your printer for costly repairs or purchasing a new one. Enjoy uninterrupted printing and make the most out of your Epson printer for a long time.
Download Epson ET-2703 Resetter
– Epson ET-2703 Resetter For Windows: Download
– Epson ET-2703 Resetter For MAC: Download
How to Reset Epson ET-2703
1. Read Epson ET-2703 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-2703 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-2703 off then on
5. Check Epson ET-2703 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114497 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson ET-2703
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien