Guide on resetting the waste ink pad counter for Epson C-110
If you own an Epson C-110 printer, there may come a time when you need to reset the waste ink pad counter. This counter keeps track of the amount of ink that has been used and when it reaches a certain point, the printer will stop working until the counter is reset. Fortunately, resetting the waste ink pad counter is a relatively simple process that can be done in a few easy steps.
To begin, turn off your printer and unplug it from the power source. Then, locate the waste ink pad, which is typically located at the bottom of the printer. It may require you to remove some screws or panels to access it.
Once you have located the waste ink pad, you will need to remove it from the printer. This can be done by gently pulling it out or unscrewing it, depending on the model of your printer. Be sure to have a cloth or paper towel handy to catch any ink that may spill.
After removing the waste ink pad, clean it under running water until the water runs clear. Allow it to dry completely before reinstalling it back into the printer.
Once the waste ink pad is dry and back in place, you can proceed with resetting the counter. This can be done by pressing and holding the power button while simultaneously pressing the maintenance button. Keep both buttons pressed until the green power light starts flashing, then release them.
Finally, turn on your printer and check if the waste ink pad counter has been reset. You should now be able to continue using your Epson C-110 printer without any issues.
It is important to note that resetting the waste ink pad counter should only be done if you have replaced or cleaned the waste ink pad. If you continue to use the printer without replacing or cleaning the waste ink pad, it may lead to ink leakage or other printing problems in the future.
Download Epson Tl 110 Resetter
– Epson Tl 110 Resetter For Windows: Download
– Epson Tl 110 Resetter For MAC: Download
How to Reset Epson Tl 110
1. Read Epson Tl 110 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson Tl 110 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson Tl 110 off then on
5. Check Epson Tl 110 Counter
How to Reset Epson C-110 : waste ink pad counter on Youtube
– Video How to Reset Epson C-110 : waste ink pad counter on YouTube, as of the current time, has received 25628 views with a duration of 0:50, taken from the YouTube channel: youtube.com/@ucin72.
Buy Wicreset Serial Key For Epson Tl 110
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien