Reset counter Samsung sl-M4070FR Printer

Price for firmware fix Samsung sl-M4070FR : $15 USD

Your Printer's name:

(*) How to find printer name

Your Printer's Version:

(*) How to find Version?

Your printer's serial number:

(*) Download a tool that shows serial number

Your printer's chip crum number:

How to find CRUM?

Your E-Mail:


(*) Please fill request field


Why Samsung sl-M4070FR needs to be reset:

– Samsung sl-M4070FR’s cartridge is enclosed with a toner chip that was used to calculate toner coverage and to deliver bold or light printout quality depending on printer original printout design.

– Samsung sl-M4070FR toner chip contains calculated limitation that was managed by Samsung manufacturer. Following Samsung, if toner coverage is 5%, Samsung sl-M4070FR toner chip is delivered 3.000 – 15.000 pages.

– If toner coverage is higher than 5% -> Toner Page Yields are less than “3.000 – 15.000” pages. If toner coverage is lower than 5%, Toner Page Yields are “3.000 – 15.000” pages. That is the reason why bold printouts (high toner coverage) will make printer run out of toner quickly.

– When Samsung sl-M4070FR toner chip overload its calculated limitation, printer will be locked inspire of high toner cartridge.

When Samsung sl-M4070FR needs to be reset:

– Samsung sl-M4070FR printer’s messages: red light blinking, imprinting.

– Computer’s messages: empty toner, Replace toner, install toner, end of life replace new cart , toner cartridge is not installed, Install the cartridge, toner exhausted.

How to fix Samsung sl-M4070FR with imprinting error:

1. Change new toner cartridge:

Toner Cartridge Samsung sl-M4070FR

Toner Cartridge Samsung sl-M4070FR

– Samsung sl-M4070FR’s toner cartridge (Samsung MLT-D203) costs $85 – $200 depending on its supplier and manufacturer.

– Changing toner cartridge seems to be suboptimal because when printer runs out of toner, we also need to change new toner cartridge => money wasting

[scis id=”1″ align=”center”]

2. Change new toner chip:

Toner chip Samsung sl-M4070FR

Toner chip Samsung sl-M4070FR

– Samsung sl-M4070FR’s toner chip costs $5 – $20 depending on its supplier.

– Changing toner chips seems to be more optimal but when printer runs out of toner, we also need to change new toner chip.

[scis id=”2″ align=”center”]

3. Reset Samsung sl-M4070FR by using software:

Firmware fix Samsung sl-M4070FR

Firmware fix Samsung sl-M4070FR

– Samsung sl-M4070FR’s reset software costs $15 USD => money saving

– Reset software automatically impacts to printer firmware so printer ignores paper counter. Therefore, there is not necessary to change toner chip, you just refill toner when it runs out.

Samsung sl-M4070FR reset software introduction:

– Product name: Samsung sl-M4070FR reset software.

– Compatible printer: Samsung sl-M4070FR.

– Compatible versions: 12f, 16f.

Notes before resetting Samsung sl-M4070FR:

– Identify accurate version, serial and crum of Samsung sl-M4070FR printer.

– Printer’s Driver is installed on computer.

– Check the connection between computer and printer to make sure it works well.

– Toner chip located over the cartridge is removed or covered by tapes.

– Remove connection gates such as USB gate, LPT gate from computer (Except for printer, keyboard, mouse).

– Make sure the electric power works well during soft-ware running process (you should use UPS for printer and computer to prevent them from loosing electric power).

When you are running firmware, do not install the manufacturer’s firmware because this firmware is displacement. If you are wrong in one of those beyond rules, your printer can be meet faulty problems and can not be recovered to the original status.

How to reset Samsung sl-M4070FR Printer:

1. Connect computer to printer by usb cable.

2. Turn printer on and wait until it is ready for working.

3. Run “download.bat”(or drag and drop *.hd file to usbprns3.exe file) file on computer.

4. “download.bat” file program will automatically run printer’s firmware. After automatic set up process, printer will be restarted by itself.

5. Restart printer one more time -> in test

How to install firmware fix by USB Cable:

How to install firmware fix by Web Access:


  1. Dear Sir,
    By purchasing the software (Firmware fix Samsung), I’m able to reset as many printers I want or it’s available for a single reset operation?


Send comment